What does an electrician do?

An electrician installs, maintains and repairs electrical power, communications, lighting and control systems, in the Bureau of Labor Statistics' summary. The day runs from reading a drawing to pulling wire, terminating, testing and finding the fault nobody else could. Electrician interview questions follow those duties.

The BLS Occupational Outlook Handbook page for electricians puts the median annual wage at $63,190 in May 2025 and projects employment to grow 9 percent from 2025 to 2035. BLS says "Most electricians learn their trade in a 4- or 5-year apprenticeship program" with "2,000 hours of paid on-the-job training" for each year, and that "Most states require electricians to pass a test and be licensed". It also says plainly: "Working with electricity is dangerous".

O*NET's profile is electricians (47-2111.00), with 21 tasks and sample titles that include Control Electrician, Electrical Troubleshooter and Inside Wireman. It shows the same 2025 median of $63,190 and rates growth over 2025 to 2035 as much faster than average. The questions below apply to construction and maintenance work.

What apprenticeship and license facts come up in an electrician interview?

Apprenticeship and license facts for an electrician are the programme you trained in, your hours, your license class and the code edition you test to. BLS says the licensing tests "have questions related to the National Electrical Code and state and local electrical codes". Interviewers ask which year of the apprenticeship you are in and which state licenses you hold.

FactWhat the source saysSource
How most electricians trainMost electricians learn their trade in a 4- or 5-year apprenticeship programBLS
Hours a yearFor each year of the program, apprentices typically receive 2,000 hours of paid on-the-job trainingBLS
LicenseMost states require electricians to pass a test and be licensedBLS
What the test coversQuestions related to the National Electrical Code and state and local electrical codesBLS
IBEW/NECA apprenticeship entryMinimum age 18, high school education, one year of high school algebra, a qualifying score on an aptitude testelectrical training ALLIANCE

The IBEW and NECA apprenticeship page lists those entry requirements for an "IBEW/NECA Joint Apprenticeship Training Program (JATC)" and says the Inside Wireman installs "the power, lighting, controls and other electrical equipment in commercial and industrial buildings". Your state licensing board is the source for license classes and renewal.

How were these electrician questions chosen?

The electrician questions below come from the tasks O*NET lists for the trade. They are drawn from published duties, not from a survey of real interviews, and none is claimed as the most asked or as what a named contractor asks. Safety answers defer to the National Electrical Code, your local code and your employer's lockout procedures.

Duty (from O*NET)Question it tends to produceWhat the interviewer is checking
Prepare sketches or follow blueprints to determine the location of wiring or equipment"Walk me through how you read a set of drawings before a job".Whether you plan before you pull wire
Plan layout and installation based on job specifications and local codes"How do you size and route a circuit to code"?Code knowledge applied to a real layout
Place conduit, pipes or tubing inside partitions, walls or other concealed areas"Describe a conduit run that did not go to plan".Craft, and what you do when the building fights you
Connect wires to circuit breakers, transformers or other components"How do you terminate and label a panel"?Neatness, labelling and torque to spec
Test electrical systems or continuity of circuits"What do you test before you energise"?A fixed test sequence
Diagnose malfunctioning systems using test equipment and hand tools"Tell me about a fault that was hard to find".Method under pressure, with the circuit de-energised
Inspect systems and components to identify hazards and defects"What do you do when you find a hazard on an existing install"?Whether you stop, report and document
Advise management on whether continued operation could be hazardous"A line manager wants the machine running now. What do you say"?Safety over schedule, and how you say it
Direct or train workers to install, maintain or repair wiring"How do you run an apprentice on a job"?Teaching and checking, within the rules
Provide preliminary sketches or cost estimates"How do you estimate materials for a job"?Takeoff method and allowance for the unknown

What blueprint and layout questions should you expect?

Blueprint questions test the planning an electrician does before any wire is pulled. O*NET lists preparing "sketches or follow blueprints to determine the location of wiring or equipment" and planning layout "based on job specifications and local codes". Interviewers listen for a reading order, a check against the code and the questions you ask before you start.

1. Walk me through how you read a set of drawings before a job.

What they listen for: that you start with the one-line and panel schedules, then the floor plans, then the specifications, and that you flag conflicts before day one. Expect "What was the last drawing error you caught"?

2. How do you lay out and size a branch circuit to code?

What they listen for: that you work from the load, the code tables and the local amendments, and that you know which code edition your state has adopted.

3. How do you estimate materials for a job you have only seen on paper?

What they listen for: a takeoff method, an allowance for waste and the unknown, and a habit of walking the site before you commit, since O*NET lists providing "preliminary sketches or cost estimates".

What installation questions come up?

Installation questions test the craft itself: conduit, boxes, wire pulls and terminations that pass inspection. O*NET lists placing "conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas" and connecting "wires to circuit breakers, transformers, or other components". Interviewers listen for method, neatness, labelling and what you do when the building does not match the drawing.

4. Describe a conduit run or wire pull that did not go to plan.

What they listen for: what you found, the change you made, who approved it and how you recorded it on the as-built.

5. How do you terminate and label a panel so the next electrician can read it?

What they listen for: torque to the manufacturer's spec, consistent labelling, a panel schedule that matches reality and a final check. Expect "What is the worst panel you have opened"?

What testing and troubleshooting questions come up?

Testing questions test whether an electrician proves a circuit safe and finds a fault by method rather than by swapping parts. O*NET lists testing "continuity of circuits" and diagnosing "malfunctioning systems, apparatus, or components, using test equipment and hand tools". Interviewers listen for a sequence, the readings you took and where you stopped to think.

6. What do you test before you energise a new circuit?

What they listen for: a fixed sequence, such as continuity, insulation resistance and polarity, with the readings you expect and the ones that would stop you.

7. Tell me about a fault that was hard to find.

What they listen for: that you isolated and locked out first, split the circuit, took readings and followed them, and told the customer what you found. This question is answered weak and fixed below.

8. A breaker keeps tripping and the customer has already replaced it twice. What do you do?

What they listen for: that you treat a replaced breaker as a symptom and look for the cause, with the circuit de-energised, and that you explain the risk in plain words. Expect "What if the customer asks for a bigger breaker"?

What safety and code questions come up?

Safety questions test whether an electrician follows the code and the lockout procedure when the schedule pushes the other way. BLS lists following "state and local building regulations based on the National Electrical Code". O*NET lists advising management "on whether continued operation of equipment could be hazardous". Interviewers listen for a stop, a report and a record.

9. What do you do when you find a hazard on an existing installation you were not sent to fix?

What they listen for: that you make it safe where you can, report it in writing and never leave a known hazard unrecorded.

10. A manager wants a machine back on before you have finished. What do you say?

What they listen for: a calm no, the reason in one sentence, and the alternative you offer, such as a timeline or a temporary safe measure.

11. Walk me through your lockout routine.

What they listen for: the sequence your employer's procedure sets, your own lock and tag, a test to prove it dead and a check before you re-energise. Say that on a new site you follow the employer's written procedure.

What supervision and customer questions come up?

Supervision questions test whether an electrician can run an apprentice or a crew and still deliver work that passes inspection. BLS and O*NET both list directing and training "workers to install, maintain, or repair electrical wiring" and equipment. Interviewers listen for how you teach, how you check and how you handle a customer paying by the hour.

12. How do you run an apprentice on a job?

What they listen for: which tasks you hand over by year, how you check the work before it is covered, and how you teach the code behind the task. Expect "Tell me about an apprentice who made the same mistake twice".

13. How do you explain a job and its cost to a customer who is unhappy?

What they listen for: plain words, the code reason for the work, and a written record of what was agreed, since O*NET lists "maintaining records or files, preparing reports". Expect "What if they refuse the work"?

How do you answer the question that best shows the electrician role?

The hard-to-find fault question shows the electrician role best, because it tests de-energising, testing, diagnosis, code and what you told the customer in one story. Below is a made-up weak answer and the same answer fixed. Both are invented examples, and neither describes a real site, employer or customer.

Question: "Tell me about a fault that was hard to find".

Made-up weak answer: "We had a circuit that kept tripping and nobody could find it. I went through the whole thing and eventually found a bad connection. I'm good at troubleshooting, it's what I enjoy most about the trade".

The weak answer has no isolation step, no readings, no method and no customer.

Made-up fixed answer: "Situation: a lighting circuit in a small commercial unit tripped at random, and the customer had already had the breaker replaced. Task: I had to find the cause, with the circuit dead, and give the customer a clear answer the same day. Action: I isolated and locked out the circuit, proved it dead, then split it at the junction boxes and took insulation and continuity readings on each section. One section read low: a cable damaged where it passed a sharp edge. I repaired it to code, re-tested the whole circuit and wrote the readings on the job sheet. Result: the circuit stayed in service, and the customer had a written record of the cause and the fix. This is an invented example; I would bring the real readings".

What follow-up questions tend to come next?

Follow-up questions for an electrician test the detail behind the stories: your apprenticeship year, your license class, the code edition you work to and the sites you have worked. Expect questions on hours, travel and overtime too, and have the exact dates and numbers ready.

  • "Which year of your apprenticeship are you in, or when did you complete it"?
  • "Which license do you hold, in which state, and when does it expire"?
  • "Which code edition does your state use, and what did you last look up in it"?

How should you prepare for an electrician interview?

Preparing for an electrician interview means writing five STAR stories from real jobs: a drawing conflict you caught, an installation that passed inspection first time, a fault found by method, a hazard you reported and a customer you talked through a cost. Know your hours, license details and code edition.

The STAR method guide covers the structure. For nearby roles, the mechanical engineer page covers another job with a licensing question, the IT support specialist page shows how troubleshooting answers are scored, and the civil engineer page covers the design side of the same sites.

The free interview question generator lets you paste the job and pick the round, and it returns likely questions, why they come up and what the interviewer listens for. The resume bullet points guide shows how to write installations, inspections and faults found as results with numbers.

Prept's Mock room lets you practise these answers out loud on a clock and scores each one out of 10, free.