What is a contract or freelance interview?

A contract or freelance interview is any screening for work with an end date or a defined scope: a staffing agency placement, a contract-to-hire role, or a direct call with a client hiring you as a contractor. The questions overlap with a permanent interview, but the priorities change: start date, availability, rate and an exact skill match come first.

The work is common. The U.S. Bureau of Labor Statistics counted 11.9 million independent contractors in July 2023, 7.4 percent of total employment (BLS), and the same release found 6.9 million workers whose sole or main job was contingent. Agency contracts, contract-to-hire and freelance client work each have their own interview shape, covered in turn below.

Which forms does a contract or freelance interview take?

Contract and freelance interviews come in three forms: an agency screen followed by a client interview, a contract-to-hire interview run much like a permanent one, and a direct client call where you are the business. The table sets out who you meet, what they decide and what to have ready.

Agency contractContract-to-hireDirect freelance client
Who screens you firstA recruiter or consultant at the agencyThe agency recruiter, then the clientThe client, often the person you will work with
Who interviews you nextThe client's hiring managerThe client, with a view to a permanent offerNobody; the first call may be the only one
What they decideWhether to present you, then whether to take youWhether to take you now and keep you laterWhether to give you the scope, at your rate
What to have readyStart date, rate range, the exact skills in the briefThe same, plus why you want this employer long termScope questions, a rate or quote, examples of similar work
Who employs or pays youUsually the agency, which bills the clientThe agency until conversionYou invoice the client as a self-employed person

The employment column matters for what you can ask. Adecco's Canadian FAQ tells associates that "Payday occurs every Friday" (Adecco Canada), and its U.S. FAQ says "Most associates usually receive their pay by Friday" (Adecco USA). On a direct freelance contract, you set the invoice terms yourself.

How does the staffing agency screen work?

The staffing agency screen is a short conversation with a recruiter who decides whether to present you to a client, after you apply or upload a resume. Robert Half says you can "upload your resume and we'll get in touch if you're a good match for any open positions" (Robert Half Canada).

Adecco Canada describes what follows: "If we see a potential match, one of our recruiters will reach out to schedule a meeting with you", after which "we may conduct a skills assessment, check references, prepare you for interviews" (Adecco Canada). Randstad's U.S. FAQ says "Your Randstad consultant will present you with opportunities that match your skills and experience" (Randstad USA).

The recruiter is checking four things: whether your skills match the brief line by line, when you can start, what rate you expect, and whether you are reliable to place. Answer the first three with numbers. "I can start Monday the 2nd, I'm looking for 55 to 65 an hour, and I've used the two systems in the brief for 3 years" is the shape.

You never pay for this. Randstad says "As a job seeker, you'll never pay for using Randstad to find a job" (Randstad USA), Adecco says "Working with Adecco as a job seeker is completely free" (Adecco Canada), and Robert Half says "we never charge job seekers for our staffing services" (Robert Half Canada). An agency that asks for a fee is a stop.

What does the client interview check on a contract role?

The client interview on a contract role checks whether you can do the specific work in the brief from the first week, and whether you will fit the team for the length of the contract. Randstad Canada describes the step: "your consultant will present you to their client to be interviewed" (Randstad Canada).

Expect the interview to be shorter than a permanent one and closer to the task. Prepare for these, which follow from the format rather than from any survey:

  • Walk me through the last time you did exactly this. Pick the project closest to the brief and give the tools, the size and the result.
  • How soon can you start, and for how long are you available? Give a date and say whether you are open to extension.
  • How do you get up to speed on a new codebase, system or client? Describe your first week in steps.
  • Have you worked on contract before? Say how you handled handover at the end of the last one.
  • What rate are you expecting? Give the range you told the recruiter. The agency usually sets the margin, so keep the figures consistent.

Robert Half's page on temporary IT work says "Our recruiters will help guide you through interviews" (Robert Half), so ask your recruiter what the client cares about most before the call. If the client says yes, Randstad Canada says "your Randstad consultant will help you negotiate your job offer and the terms of your placement" (Randstad Canada). Keep every story in STAR shape; the STAR method guide covers the structure.

What is a contract-to-hire interview?

A contract-to-hire interview is a contract interview where the client is also deciding whether to keep you permanently, so it carries the long-term questions of a permanent interview. Randstad's US FAQ says temporary assignments last "as little as one day" and up to "18 months", with common lengths of "2, 3, 4, 6 and 12 months" (Randstad USA).

Treat it as a permanent interview with a trial attached. Prepare a plain answer to why this employer, what you want to be doing in a year, and how you have handled a conversion before if you have. Robert Half's temporary IT page says working relationships "are often the key to turning a contract role into a permanent IT position" (Robert Half). Ask what conversion depends on and who decides.

Conversion is never promised. Ask the recruiter what share of placements at this client have converted, and ask the client what a successful first 90 days would look like. If the answer is vague, plan for the contract to end on its date.

What does a direct freelance client call look like?

A direct freelance client call is an interview where you are the business: the client is deciding whether to buy a defined piece of work from you at your price, and you are deciding whether the scope and the payment terms are safe to take on. Nobody screens you first, so one call covers proof, scope and terms.

Run the call in three parts. Scope: what exactly is wanted, by when, what is already done, and what a finished result looks like. Proof: one or two examples of similar work, with what you delivered and when. Terms: your rate or a fixed quote, payment schedule, revisions and who owns the result, as in this made-up script:

"For the scope we just discussed, I'd quote a fixed fee of 2,400, half on signing and half on delivery, with two rounds of revisions included. Delivery would be 3 weeks from the deposit. Does that fit your budget and timeline?"

Ask more than you answer. A client who cannot describe a finished result is a scope risk, and a client who will not discuss payment terms on the call is a payment risk.

Are you a contractor or an employee, and why does it matter in the interview?

Contractor or employee is a question of control: it decides who pays your tax and what the client can ask of you. The IRS rule: you are an independent contractor if the payer "has the right to control or direct only the result of the work and not what will be done and how it will be done" (IRS).

The same page adds the other side: "You are not an independent contractor if you perform services that can be controlled by an employer (what will be done and how it will be done)." The IRS also notes that independent contractor earnings "are subject to self-employment tax" (IRS). Canada's guide RC4110 says "The facts of the working relationship as a whole decide the employment status", lists control, tools and equipment, subcontracting, financial risk and opportunity for profit among the factors, and says a worker or payer who is unsure "can ask the CRA for a ruling" (Canada Revenue Agency).

In the interview this shapes your questions. On an agency contract you are usually the agency's employee, so ask about timesheets, pay dates and benefits. On a direct freelance contract you are self-employed, so ask about scope, invoicing and ownership, and expect to use your own tools and hours. Neither page gives tax advice for your situation, and neither does this one; the contract work on a resume guide covers how to list each type.

What should you ask before you accept a contract?

Before accepting a contract, ask for the length and end date, the rate and when it is paid, who your employer is, whether extension or conversion is possible, and what the first week looks like. Agencies answer most of these on their own pages, and a recruiter should answer the rest on the call.

  • Length and end date. Randstad says assignments "vary depending on the employer and the role" (Randstad Canada); get the date in writing.
  • Pay and timesheets. Ask the pay day, how hours are recorded and who approves them.
  • Benefits. Randstad Canada says it "offers health and dental benefits to all our temporary employees" (Randstad Canada), and Adecco Canada lists group health, dental and life insurance in its package (Adecco Canada). Ask what you qualify for and when.
  • Next assignment. Adecco Canada says "we'll contact you before the assignment ends to discuss potential new opportunities" (Adecco Canada). Ask how far ahead.

If a client wants you to work a trial shift before deciding, the working interview guide covers when that must be paid.

How do you prepare for a contract or freelance interview?

Prepare for a contract or freelance interview by matching your resume to the brief line by line, fixing your start date and rate before the call, and picking the one project that most resembles the work. Then rehearse the first-week question out loud. Most contract interviews are short, and the first two minutes decide whether the rest is a formality.

The free job match tool checks every requirement in the posting against your resume and scores it out of 10, which shows the gaps a recruiter will ask about. Paste the brief into the interview questions tool and pick the round to see likely questions and what the interviewer listens for. If the call is on video, the video interview tips page covers the setup, and the questions to ask the interviewer guide has more for the client round. For practice out loud on a clock, Prept's Mock room scores each answer out of 10 against your resume and is included in the free plan.